Counteract corrosion in commercial and industrial hydronic systems with ADEY®’s NEW, MagnaClean CMX™ side-stream filter!

ADEY’s new MagnaClean CMX range of filters provide adaptive magnetic and non-magnetic side-stream filtration for closed loop heating and chiller applications.

Extend component and system life through the protection of system equipment such as heat pumps, boilers, pipework, and sensors/controls, reduce maintenance costs and hours, improve heat transfer, heat output and efficiency, save energy, lower clients’ utility bills and reduce carbon emissions with this easy-to-service range of filters.

The clock to counteracting corrosion begins as soon as a new system is installed; whether that’s due to contaminant exposure during the manufacturing, transportation and storage process of components, flux build-up during soldering, air pockets forming upon initial system fill, and/or poor water quality upon initial fill.

Why wait for the system issues to arise?

The MagnaClean CMX range is the latest innovative extension of ADEY’s already existing, market-leading MagnaClean® range of filters, offering a new and unique way of capturing both magnetic and non-magnetic debris by combining powerful neodymium magnets with a range of high quality, 5-50 micron spun-bonded filter cartridges, and needlefelt bag filters . These cartridge & bag filters also act as passive deaerators, encouraging the release of dissolved air & gases from the system water which can then be vented via the automatic air vent which is included with each of the three side-stream filters within the range: the MagnaClean CMX Nano™, Midi and Maxi.

CMX group shot canva.jpg

Adey filters-99 copy.jpg

Side-stream installation helps deliver reduced installation time, complexity & costs, with no need to partially or fully drain a system or cut into and weld pipework & flanges. Pipework connections can also be downsized, offering further cost-effective installation options. Existing side-stream pipework connections can also be used, meaning an existing pot feeder can be easily replaced by a CMX filter.

The MagnaClean CMX range can also be serviced with little or zero system downtime or flushing, meaning minimal water & heat loss during maintenance. This makes the range ideal for a wide range of commercial & industrial applications such as manufacturing plants, sports facilities, hospitals, schools etc. The Midi and Maxi sizes also act as pot feeders, making chemical dosing / water treatment management effortless.

3. Solids removed at week 1.jpg

Constructed from 316L stainless steel with EPDM seals, ADEY have stuck to their roots by delivering on quality, yet again with this new filter range. Compact and lightweight, with self-supporting, pipe clip and floor-standing options, tool-free servicing with a removable magnet assembly, the MagnaClean CMX range is easy to install and service. The innovative CMX Nano External Magnetic Jacket and CMX Nano filter combine to help accelerate the removal of highly damaging magnetite debris from heating & chilled systems, creating what is possibly the most compact, yet powerful commercial system filter combination available today.

The innovative MagnaClean CMX range is a highly efficient and flexible product solution which delivers formidable dual-filtration performance, direct chemical dosing capability and improved system efficiencies & protection, helping to reduce maintenance costs, energy usage and carbon emissions. Available May 2022. Be the first to receive information on this range here -

Culligan Midi Filter - All (2).png