USA
End-User Benefits
- Protection of system equipment such as boilers, pumps, pipework, sensors/controls etc.
- Reduced maintenance costs
- Improved heat transfer, heat output and efficiency
- Reduced carbon emissions
- Gas savings = reduced heating bills
- Extended component and system life
"It’s clear to me that these filters are definitely a necessity for any hydronic heating system, whether it be old or new"
Steve Mulligan, Technical Trainer at Sweeney Rogers Geraghty Inc.
Technical Information
Looking to specify or install our MagnaClean DRX dirt filter? Look no further than our documents below.
Technical Specifications
Casing
- Material: 304L Stainless Steel
- Volume Gallons (approx): 2" = 1.3 / 3" = 1.7 / 4" = 2
- Flow configuration: In-line
- Seals: EPDM Flange gaskets
- Drain point thread: ¾'' NPT
- Maximum working pressure: 10 Bar
- Maximum working temperature: 212°F
- Air vent: 3/8" automatic air vent
Magnet Assembly
- Casing: Glass reinforced nylon
- Magnets - type: Neodymium
- Magnets - number of: 2" = 48 / 3" = 64 / 4" = 80
- Magnets - dimensions: 3/4'' Dia x ½'' Thk
Flow Flange ANSI
- Flange diameter: 2" = (6'') / 3" = (7½'') / 4" = (9'')
- Flange thickness: 2" = (3/4'') / 3" = (1'') / 4" = (1'')
- Flange type ANSI: B16.5 Class 150
- Bolt size: (5/8'')
- Bolt quantity: 2" = 4 / 3" = 8 / 3" = 8
- Bolt hole PCD: 2" = (4¾'') / 3" = (6'') / 4" = (7½'')
Approvals
- ASME: ASME VIII DIVISION 1-2017
- Weight ( lbs ) ASME/CRN: 2" = 24.5 / 3" = 36.2 / 4" = 46.1
Features and Install Benefits
- Construction conforms to ASME standards and is CRN approved
- Unique external magnetic belt for easier servicing and cleaning - no contact with magnetite
- Spring-loaded magnets ensure magnets align properly with canister, maximizing capture. 48 magnets in 2"; 64 in 3"; 80 in 4"!
- Installs vertically or horizontally to fit any system type without incurring additional material costs
- Suitable for both side stream and in-line installations
- Larger canister than pipe size = water spends longer in canister = more time for magnetite to be captured. Reduction in flow = less magnetite wash-off
- Only 6" servicing clearance - suitable for mechanical rooms with limited space
- Press-fit installation - suitable for new installs and retrofits
- Lightweight = one-man lifting and installation = reduced labor costs
- Virtually zero pressure drop
- Allows specifiers to deliver more competitive quotes, and engineers to meet spec at a more affordable cost
Suggested Products
MC1+ Protector
Fast chemical protection from magnetite and limescale
View product